Reset Search
 

 

Article

How to install Nepton 280L at the top of MasterCase Pro 5

« Go Back

Information

 
Answer
Please Note: To install Nepton 280L at the top, the ODD cage would need to be removed.

1.Remove the Top cover
User-added imageUser-added image



2. Nepton 280L radiator is too large for the cut out at the top of the case and will not install from outside of the chassis. 
User-added image


3. Place the 2 140mm fans on top of the radiator and raise them from inside the case to the liquid cooler bracket.  
User-added image


4.Make sure the screw holes are all aligned between the fans and the radiator while rasing them to the bracket.
User-added image


5.Secure the fan-cooler to the bracket. We recommend installing the outside radiator screws first then installing the 4 center screws. Tighten up the screws diagonally at the same time if possible.

User-added image

Please note that if the fans do NOT have the rubber padding at the corners, it will not have enough space to install the cooler, since the radiator will interfere with the top plate cooler cut-out flap. 
User-added image
User-added imageUser-added image
Cooler installed.
User-added image

Please also note that the space between the radiator and the MB will limit the option to install Push/Pull fans, as they can with Nepton 240M.
Nepton 280L
User-added image

Nepton 240M with Push/Pull fans

User-added image


 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255