Reset Search
 

 

Article

How to install a Jetflow fan on the Hyper 212 EVO

« Go Back

Information

 
Answer

User-added image

1. Remove the stock fan off of the Hyper 212 EVO.


2. Remove the Rubber Anti-Vibration pads from the corners on the back side of the fan.
User-added image


3. Remove the fan brackets by unscrewing the four fan screws.

User-added image
4. Use the M5*8 screws that come with the Jetflo fan to reattach the fan brackets.
User-added image

5. Slide the Jetflo fan onto the Hyper 212 EVO Heatsink.

User-added image

6. Press down on the edges of the fan clips so that they lock into the groove
    on the side of the heatsink.
User-added image

6. Your Hyper 212 EVO should look like the image below after you have completed the installation
User-added image

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255