|
1) Remove thumb screw holding down the top panel at the back of the case |
|
2) Remove both side panels |
|
3) On each side of there are 3 tabs holding down the top panel that needs to be unhooked in order to remove the top panel. Pull outwards to unhook the tabs and lightly push upwards to release, please see below: |
 |
|
4) Once all 6 tabs are unhooked please gently pull out the top panel |
 |
|
5) Line up the 200mm fan to the holes in the diagram below and fasten the fan screws to secure |
 |